Reactive M Series Dyes (Dichlorotriazine)

 

 

REACTIVE M SERIES DYES are highly reactive requiring comparatively milder conditions in dye fixatoin. They are primarily of interest in dyeing at normal room temperature (about 25 – 35 Deg. C) using Soda Ash or Sodium Bicarbonate.

 

0.5%
DYEING 4.0%		 REACTIVE
M
Series
Dyes
(Dichlorotri-
azine)		 C.I.
No.Y.86		 General
Properties		 Fastness
Properties		 Suitability
Affi-
nity		 Solubi
lity
at 300C		 Dis
charge
ability		 Day
Light 1/1 & 1/6		 Wash
ing
ISO4		 Alka-
line		 Perspi-
ration		 Exha-
ust
at
R.T.		 Printing
Acidic Hypo-
chlorite
Bleach		 Steam Sili
cate
  Yellow
M4G		 Y.22 H 50 G 4-5
5-6		 5 4 4-5 1 + + –
Yellow
MR		 Y.44 H 100 P 4
5		 4-5 4 5 2 + (+) –
Brill.
Orange M2R		 O.4 H 100 P 4
5		 5 4 4 3 + + –
Red
M5B		 R.2 H 100 F 3-4
4-5		 4-5 4 4-5 1 + + –
Red
M8B		 R.11 H 70 P 3-4
4-5		 4-5 4 4-5 4 + + –
Magenta
MB		 V.13 H 80 F 3-4
4-5		 4 3-4 5 3 + + –
Violet
M4R		 V.12 H 80 F 3-4
4-5		 4 3-4 5 3 + + –
Brill.
Blue MR		 B.4 H 80 P 6
6		 5 3-4 4-5 3-4 + + –

Reactive H Series Dyes (Monochlorotriazine)

 

REACTIVE H SERIES DYES are monochlorotriazine reactive dyes having a low reactivity and low substantivity. Since these dyes have low reactivity, they require more severe conditions for fixation with cellulosic materials. They are readily soluble by pouring water of 80-85oC on powder & stirring well. They are applicable on cellulosic materials by  printing methods.

 

0.5% DYEING4.0% REACTIVEH Brand Dyes(Monochloro-triazine) C.I.No. GeneralProperties FastnessProperties Suitability
Affi-nity Solubility at 300C Dischargeability DayLight 1/1 & 1/6 WashingISO4 Perspiration Hypo-chloriteBleach Exha-ust 40oC& 60oC OneBath Pad Batch OneBath Pad-Dry Stream Printing
Alka-line Acidic Steam Sili-cate
Yellow H4G Y.18 L 120 G 5-66-7 5 4-5 5 1 (+) + + + +
G.YellowHR O.12 H 100 F 56 5 5 5 3 + + + + +
OrangeH2R O.13 H 180 F 3-44-5 5 5 4 4 + + + + +
RedH8B R.31 H 100 P 34 5 4 4 3-4 + + + + +
MagentaHB V.13 M 100 P 34 4 4 4 1 + + + + +
PurpleH3R V.1 M 100 P 5-66-7 5 3 3 4 + + + + +
BlueH5R B.13 L 100 P 56 5 4-5 5 1-2 + + + + +
T.Blue H5G B.25 H 80 P 45 4 4 4 3 + + + + +
RedBrown H4R Br.9 L 80 F 45 4 4 4 4 + + + + +
BlackHN Bl.8 L 60 P 4-55 4-5 4-5 4-5 3-4 – + + + +

Reactive ME Series Dyes (Bifunctional)

 

REACTIVE ME SERIES DYES are mixed Bifunctional reactive dyes where Vinyl Sulfone group is linked to chromophore through a mono chloro triazine group as a bridge link. They are applicable on cellulosic material at lower dyeing temperature 60oC. The main features of these ‘Bifunctional’ dyes are as under:

  • The dye-fibre bond between Vinylsulfone group and cellulose is stable to acid hydrolysis, so that stability of dyed goods in industrial acidic atmosphere is very good with the time lapse.
  • The dyes which are not fixed during the dyeing process can be washed off easily because the hydrolyzed dye has low substantivity and thus there is a little risk of staining of adjacent whites.
  • Excellent leveling properties.
  • Better reproducibility in dyeing.
  • High exhaustion and high fixation efficiency.
  • Good all round fastness properties.

 

0.5%
DYEING 4.0%		 REACTIVE
ME Series
Dyes
(Bifunctional)		 C.I.
No.		 General
Properties		 Fastness
Properties		 Suitability
Sub-
stanti-
vity		 Solubi
lity at
500C		 Dis
charge
ability		 Day Light 1/1 Wash
ing
ISO4		 Perspiration Hypo-
chlorite
Bleach		 Pero-
xide
Bleach		 Exha-
ust
40oC
&
60oC		 One Bath Pad Batch One Bath Pad-Dry
Stream		 Printing
Alka-
line		 Acidic Steam Sili-
cate
Yellow ME4G
150%		 Y.186 M 120 G 6 4 4-5 4-5 1 4 + (+) – + +
Yellow MERL
150%		 Y.145 M 100 G 5 3-4 4 4 1 3-4 + (+) + + +
Orange
ME2RL150%		 O.122 H 75 P 5 4-5 4-5 4-5 3 4 + + + + +
Red ME4BL
150%		 R.195 H 100 P 5 4-5 5 5 1 4 + + + + +
Red MERB
150%		 R.198 H 100 P 5-6 5 5 5 1 3 + + + + +

Reactive HE Series Dyes (Bis-Monochlorotriazine)

 

REACTIVE HE SERIES DYES are suitable for dyeing cotton and other cellulosic materials. These dyes possess significantly higher exhaustion and fixation efficiency, which results in appreciable cost reduction, in comparison to conventional reactive dyes. The high fixation and good build up are of particular importance when dyeing polyester/cellulosic blends and wash liquor : goods ratio is quite high. Due to higher fixation of HE dyes, the drained and wash liquors after dyeing contain much less quantity of unfixed dyes, in comparison to conventional reactive dyes, which is of interest when pollution control is a major concern to everybody. .

 

0.5%DYEING
4.0%		 REACTIVE
HE Series
Dyes
(Bis-Monochlorotri-
azine)		 C.I.
No.		 General
Properties		 Fastness
Properties		 Suitability
Affi-
nity		 Solubi
lity at
300C		 Dis
charge
ability		 Day Light 1/1 &
1/6		 Wash
ing
ISO4		 Perspi-
ration		 Hypo-
chlorite
Bleach		 Pero-
xide
Bleach		 Exhaust
Dyeing		 One
Bath
Pad
Stream
Alka-
line		 Acidic
Yellow
HE4G		 Y.105 H 100 F 4-5
5-6		 5 4 4-5 2 4-5 + (+)
G Yellow
HER
110%		 Y.84 H 100 F 5
6		 5 4 4 3 4-5 + (+)
Orange
HER		 O.84 H 40 P 3-4
4-5		 5 4 3 3 4 + –
Red
HE8B		 R.152 H 80 P 3-4
4-5		 4 4 4-5 2 4-5 (+) –
Navy Blue HER
150%		 B.171 H 100 F 4
5		 4-5 5 4-5 3 4-5 + (+)
T Blue
HA		 B.71 M 100 G 5
6		 4 5 5 3 5 + (+)
Green
HE4BD		 G.19 H 100 GF 4
5		 4-5 4 4 2 2-3 + (+)

 

Reactive VS Based Dyes (Bi-Sulfatoethye Sulfone Class)

 

REACTIVE VS BASED DYES are Reactive Dyes possessing Vinyl sulphone as the reactive group. In presence of alkali, these dyes chemically react with the hydroxyl group of cellulose and form firm, convalent linkages. These dyes are versatile enough to suit different dyeing methods. Results are excellent and shades come clean and brilliant with no variation in dyeing as well as in printing.

The main features of VS dyes are:

  1. Process excellent brightness and good wet fastness.
  2. They are dischargeable.
  3. They are suitable for exhaust & different pad dyeing methods and discharge printing.
  4. Ease of washing off unfixed dyestuffs i.e. minimum staining of the white grounds in printing.
  5. They are applicable at 40oC and 60oC.

 

DYEING 1.0%
PRINTING 4.0%		 RAMAZOL
VS Based
Dyes
(Bi-Sulfatoethye
Sulfone
Class)		 C.I.
No.		 General
Properties		 Fastness
Properties		 Suitability
Sub-
stanti-
vity		 Solubi
lity at
300C		 Dis
charge
ability		 Day Light 1/1 &
1/6		 Wash
ing
ISO4		 Perspiration Hypo-
chlorite
Bleach		 Exha-
ust
40oC
&
60oC		 One Bath Pad
Batch		 One Bath Pad-Dry
Stream		 Printing
Alka-
line		 Acidic Steam Sili-
cate
Yellow
FG		 Y.42 L 100 G 4
5		 5 5 5 1 (+) + + + +
Yellow GR
150%		 Y.15 H 100 G 4-5
6		 5 5 5 1 + + + + (+)
Yellow R
120%		 Y.17 H 100 G 4-5
6		 5 5 5 1 + + + + (+)
Gol.Yellow
RNL		 O.107 M 100 G 4-5
5		 4-5 5 5 1 + + + + +
Orange 3R
150%		 O.16 H 80 G 5
6		 4-5 4-5 4-5 1 + + + + +
Red
C2G		 R.106 L 100 G 3-4
4		 5 5 5 1 (+) + + + +
Red
5B		 R.35 L 100 G 3-4
4		 5 5 5 1 (+) + + + +
Red
RB		 R.198
A		 H 100 F 4-5
5		 4 5 5 1 + + + + (+)
Violet 5R
140%		 V.5 M 100 P 5-6
7		 4 5 5 2 + + + + (+)
T.Blue G
133%		 B.21 H 100 P 6
7		 4-5 4-5 4-5 3 + + + + +
Brown
GR		 Br.18 M 100 G 5-6
6		 5 5 5 1 + + + + +
Black B
100		 Bl.5 VH 150 G 4
5		 5 5 5 1 + + + + +
Black
RL		 Bl.31 H 100 F 6
7		 5 5 5 1 + + + (+) (+)
Black
HFGR		 Mix VH 100 G 4
5		 5 5 5 1 + + + + +
Black
WNN		 Mix VH 100 G 4
5		 5 5 5 1 + + + + +

 

 

 

 

GET A QUOTE

Looking for a quality and affordable products?

Translate »

This site is using the Seo Wizard plugin by http://seo.uk.net/